Portable & Mobile Gantries · 250kg to 5t

Portable gantry cranes you wheel to the job

Steel or aluminium A-frame gantries on braked castors, from 250kg to 5,000kg, with adjustable height on most models. Two people assemble one in minutes, roll it to the lift and store it flat afterwards. Supplied with a manual or electric chain hoist, delivered with its test certificate, and built to BS 2853, BS EN 1993 (steel) and BS EN 1999 (aluminium).

Granada portable gantry crane in a UK workshop STEEL OR ALUMINIUM
250kg to 5t
Capacities
2 to 6m
Spans as standard, more to order
2 to 5m
Height under beam, adjustable
Minutes
To assemble, two people
Steel or aluminium?

Two materials, one job each.

Steel for capacity and outdoor use. Aluminium for anything that moves often. Both are A-frames on castors with a hoist on the beam.

 Steel gantryAluminium gantry
Capacity500kg to 5,000kg250kg to 2,000kg
BeamTraditional I-beam or Eurosystem profile beamAluminium profile beam
WeightHeavier; moved unloaded on castorsLight enough for two people to carry and assemble
HeightFixed or adjustableAdjustable
BracingBraced, or bracing-free where headroom is tightBraced
Indoors / outdoorsBoth; painted or galvanised for outdoorsIndoors, or outdoors in fair weather
Moves under load?Model dependent; ask usModel dependent; ask us
Best forWorkshops, yards, heavier plantMaintenance teams, frequent moves, vans

Bracing stiffens the frame during the lift and travel. Bracing-free designs give a clear opening under the beam for awkward loads. Our guide covers the choice: which portable gantry do I need?

What is included

Gantry, hoist, trolley, certificate.

We supply the gantry as a working lift, not a kit of parts. The hoist is sized to the gantry and the job, the trolley fits the beam, and the whole assembly is load tested before it leaves us.

  • A-frame gantry, steel or aluminium
  • Braked castors for your floor
  • Manual or electric chain hoist
  • Push or geared travel trolley
  • Test certificate and declaration of conformity
  • Assembly instructions and training if needed
  • Optional: radio control, load limiter, lifting beam
  • LOLER inspections from 12 months on
Portable gantry with electric chain hoist
Where they are used

Any lift that happens in a different place each time.

A portable gantry goes where the work is. It costs a fraction of a fixed crane, needs nothing bolted to the building, and comes with you if you move.

  • Maintenance and fitting shops
  • Machine and plant moves
  • Engine, gearbox and pump changes
  • Vehicle, bus and rail depots
  • Loading and unloading vans
  • Test cells and clean rooms (aluminium)
  • Water, utilities and pumping stations
  • Construction sites and yards
Gantry crane in use in a UK workshop
The range

Standard portable gantries.

Need more than 5 tonnes?

When a portable gantry is not enough.

Heavier, or repeated all day

Motorised gantry

Built to your capacity

Powered travel and hoist, pendant or radio control. For loads too heavy to push or lifts repeated through a shift.

Motorised gantries
Outdoor yards, big loads

Goliath crane

5 to 500 tonnes and beyond

Rail-mounted, single or double girder, with the hoist and controls of a full overhead crane.

Goliath cranes
A whole bay, permanently

Overhead gantry crane

1 to 60 tonnes

Runs on rails fixed to the building and reaches every point in the bay. The right answer when the lift is daily and the building can take it.

Overhead gantry cranes
How to order

Four things we need to quote.

The load

Heaviest item you will lift, and what it is.

The lift

Lift height needed, and the headroom available above it.

The space

Width to clear, floor surface, doorways the gantry must pass through.

How often it moves

Once a month in one bay, or daily around the site. This decides steel or aluminium.

FAQs

Portable gantry questions.

250kg to 5,000kg as standard. Above that you need a motorised gantry or a goliath crane.

Some models can, at walking pace on a flat floor, within the limits in the manual. Others must be unloaded first. Tell us how you want to use it and we will specify the right one.

Steel for capacity and outdoor use. Aluminium when the gantry is carried, moved often or goes in a van. Aluminium costs more per tonne of capacity but saves time every time it is moved.

Minutes, with two people and no special tools on most models. It breaks down flat for storage or transport.

Yes, if you want it. We size a manual or electric chain hoist and trolley to the gantry and supply the whole thing load tested and certified.

Yes. It is lifting equipment and needs a thorough examination at least every 12 months. We supply the first certificate and can carry out the inspections after that.

Yes. Non-standard spans, extra height, low headroom and bracing-free designs are all built to order in our own works.

Get a portable gantry quote.

Send us the load, lift height, space and how often it moves. We will come back with the gantry, the hoist and a price.