Granada Cranes Logo
UK-Wide · Independent Crane Specialists

Overhead Crane Repairs

Granada Cranes provides professional overhead crane repairs for industrial sites across the UK. From mechanical faults and electrical issues to hoist problems, brake repairs, wire rope defects and control system faults, our experienced crane engineers can inspect, diagnose and repair a wide range of overhead crane systems.

Speak to a Crane Repair Specialist View Crane Servicing
Fault diagnosis & repair
Mechanical & electrical repairs
Planned & reactive support
UK-wide crane engineers
Granada Cranes engineer repairing an overhead crane in an industrial facility Close-up of an overhead crane hoist undergoing repair

A faulty overhead crane can affect production, safety, material handling and site efficiency. Whether the issue has been found during routine maintenance, a LOLER inspection, daily operation or a breakdown, Granada Cranes can help identify the cause and recommend the right repair solution. We support overhead cranes, gantry cranes, bridge cranes, hoists, monorails, jib cranes and associated lifting equipment across a wide range of industrial environments.

01 · Repair Services

Overhead crane repair services for industrial sites.

Overhead cranes are relied on every day in manufacturing, engineering, warehousing, logistics, steelwork, aerospace and heavy-duty industrial environments. When a crane develops a fault, it is important to act quickly before the issue becomes more serious.

Granada Cranes provides overhead crane repair services for both planned and reactive requirements. This may include repairing known defects, responding to operational faults, rectifying inspection issues or carrying out repairs as part of a wider maintenance programme.

Overhead crane repair work being carried out on site

View our Crane Servicing & Maintenance services →

Our crane repair services can support

  • Overhead crane repairs
  • Gantry crane repairs
  • Bridge crane repairs
  • Hoist repairs
  • Crane brake repairs
  • Electrical fault diagnosis
  • Mechanical repairs
  • Wire rope replacement
  • Chain replacement
  • Limit switch repairs
  • Pendant & radio remote control faults
  • Crane travel faults
  • Load limiter & safety device issues
  • Runway & rail-related defects
  • LOLER defect rectification
02 · Fault Diagnosis

Common overhead crane faults we can repair.

Crane faults can develop for many reasons, including wear, age, heavy use, poor alignment, damaged components, electrical failure, lack of servicing or harsh operating conditions. Granada Cranes can inspect and repair a wide range of common overhead crane faults, including:

Crane not lifting or lowering correctly
Hoist not responding
Crane not travelling smoothly
Unusual noise during operation
Brake slipping or failing to release
Wire rope damage
Chain wear or damage
Hook or bottom block issues
Pendant control problems
Radio control faults
Limit switch failure
Overload protection faults
Electrical control faults
Motor or gearbox problems
Poor crane alignment
Runway or rail issues
Failed inspection defects

If a repair is not the most suitable long-term option, our team can also advise on replacement parts, upgrades, modernisation or full crane replacement.

For urgent faults, view Breakdown & Repairs →

03 · Planned & Reactive

Planned and reactive crane repairs.

Not every crane repair is an emergency. Some issues are identified during planned maintenance, operator checks, inspections or routine servicing. Others appear suddenly and need a faster response. Granada Cranes can support both.

01

Planned crane repairs

Useful when a fault has been identified but the crane can still be managed safely until repair work is scheduled — helping reduce disruption and avoid unnecessary downtime. This may include brake replacement, wire rope replacement, component replacement, control upgrades, runway adjustments or defect rectification following inspection.

02

Reactive crane repairs

Required when a crane develops a fault unexpectedly or can no longer operate safely. Granada Cranes can help diagnose the issue, advise on safe next steps and carry out the required repair work where possible.

Learn about Crane Maintenance Contracts →

04 · Mechanical

Mechanical crane repairs.

Mechanical faults can affect the safety, reliability and performance of an overhead crane. Worn or damaged components can lead to poor operation, abnormal noise, reduced lifting performance or unsafe movement. Granada Cranes can support mechanical crane repairs involving:

Brakes
Gearboxes
Motors
Wheels
Bearings
Hooks
Bottom blocks
Wire ropes
Chains
Drums
Sheaves
End carriages
Crane travel systems
Hoist components

Where appropriate, we can also advise whether replacement parts, refurbishment or modernisation would provide a better long-term solution.

05 · Electrical

Electrical crane repairs and fault diagnosis.

Electrical and control faults can be difficult to diagnose without specialist crane knowledge. A crane may fail to respond, move intermittently, stop unexpectedly or behave inconsistently due to issues within the control system, power supply, cabling, pendant, radio control or safety circuits. We can support electrical crane repairs involving:

Control panel faults
Pendant control issues
Radio remote control faults
Festoon system faults
Power supply problems
Motor control issues
Limit switch faults
Load limiter faults
Inverter or drive issues
Wiring & connection faults
Safety circuit problems

If the crane control system is outdated or unreliable, we can also advise on suitable upgrades as part of a wider crane modernisation project.

View Crane Radio Remote Control Systems → View Crane Modernisation →
06 · Hoist Repairs

Hoist repairs for overhead cranes.

Many overhead crane faults are linked to the hoist. If the hoist is not lifting correctly, lowering smoothly or responding as expected, the crane may not be safe or practical to use.

Granada Cranes can repair and service hoists used on overhead crane systems, including electric chain hoists, wire rope hoists, open barrel hoists and travelling hoists.

Wire rope hoist on an overhead crane being serviced

View Hoist Repairs & Servicing →

Hoist repair work may include

  • Brake repairs
  • Chain replacement
  • Wire rope replacement
  • Hook & bottom block repairs
  • Limit switch repairs
  • Motor faults
  • Gearbox issues
  • Pendant control problems
  • Radio remote faults
  • General servicing & maintenance
07 · LOLER Defects

Repairs after LOLER inspection defects.

If defects are identified during a LOLER inspection or thorough examination, they should be dealt with properly before the equipment is returned to normal service.

Granada Cranes can support repair work following inspection defects. Our engineers can help you understand the issue, the level of risk and the most appropriate repair route — so your lifting equipment can be brought back into safe working condition.

Learn more about LOLER Inspection →

Repair work after inspection can include

  • Mechanical repairs
  • Electrical repairs
  • Component replacement
  • Hoist repairs
  • Brake repairs
  • Wire rope replacement
  • Further assessment where required
08 · Repair or Replace

Repair, replace or modernise?

In some cases, a repair is the most practical and cost-effective option. In others, repeated faults may be a sign that the crane or hoist is becoming unreliable, difficult to maintain or no longer suitable for the way the site operates. Granada Cranes can advise on the right route. This may be relevant if:

The same fault keeps returning
Parts are difficult to source
The crane is regularly out of service
Controls are outdated
The hoist is no longer reliable
The crane no longer suits the operation
Repair costs are becoming excessive
Safety or compliance concerns are increasing

Where modernisation is more suitable, we can advise on control upgrades, hoist replacement, radio remote conversion, braking systems, load monitoring, safety improvements and wider crane refurbishment.

View Crane Modernisation →

09 · Why Granada

Why choose us for overhead crane repairs?

Choosing the right crane repair company is important. Repairs need to be handled by engineers who understand the full crane system, not just the individual fault.

Independent crane repair expertise

We can support a wide range of crane systems, hoists, controls and components from different manufacturers.

Mechanical & electrical support

Our engineers can help diagnose and repair both mechanical and electrical crane faults.

Complete crane systems

We can assess the wider lifting system, including the crane, hoist, runway, controls, brakes and safety devices.

Planned maintenance & aftercare

Following repair work, we can provide ongoing servicing and maintenance to help reduce the risk of repeat faults.

UK-wide industrial support

We support industrial customers across the UK with crane repairs, servicing, maintenance, inspections and breakdown support.

10 · Get Started

Need help with an overhead crane fault?

If your overhead crane is not operating correctly, has failed an inspection or needs repair work, Granada Cranes can help. To provide the most useful advice, it helps to know:

Crane type
Lifting capacity
Hoist type
Description of the fault
Whether the crane is still operating
Any recent inspection or LOLER defects
Manufacturer, if known
Site location
Photos of the crane or component, if available

Even if you do not have all of this information, our team can help identify the next steps.

FAQs

Overhead crane repair questions.

Do you repair overhead cranes?

Yes. Granada Cranes provides overhead crane repairs for industrial sites across the UK, including mechanical faults, electrical faults, hoist repairs, brake repairs, control issues and inspection defects.

What types of overhead crane faults can you repair?

We can support faults involving hoists, brakes, wire ropes, chains, controls, limit switches, motors, gearboxes, pendant controls, radio remotes, travel systems and safety devices.

Is this different from emergency crane breakdown support?

Yes. This page is for broader overhead crane repair work, including planned and reactive repairs. For urgent breakdowns, Granada Cranes also provides breakdown repair support.

Can you repair hoists as part of an overhead crane repair?

Yes. Hoists are often central to crane repair work. We can support electric chain hoists, wire rope hoists, open barrel hoists and travelling hoists.

Can you repair defects found during a LOLER inspection?

Yes. If defects are found during a LOLER inspection, Granada Cranes can advise on the repair work required and help bring the equipment back into safe working condition.

Can you repair cranes from different manufacturers?

Yes. Granada Cranes is an independent crane specialist and can support a wide range of overhead crane systems, hoists and components from different manufacturers.

What if the crane is too old to repair?

If repair is not practical or cost-effective, Granada Cranes can advise on modernisation, replacement parts, hoist replacement or a new crane system.

Can repairs be included in a maintenance contract?

Repair work is usually handled separately from planned maintenance, but maintenance contracts can help identify faults earlier and reduce the risk of unexpected repair work.

Crane Repairs · UK-Wide

Speak to an overhead crane repair specialist.

Keep your lifting equipment safe, reliable and properly supported with professional overhead crane repairs from Granada Cranes — fault diagnosis, repairs, servicing and ongoing support.

Contact Granada Cranes View Crane Servicing